Skip to main content

Acron increases nitric acid output in Veliky Novgorod

Published by
World Fertilizer,


Acron Group has commissioned a new 135 000 tpy nitric acid unit at its production site in Veliky Novgorod, the second new unit in 2 years. The first unit, with the same design capacity, was launched at the Veliky Novgorod site in early 2019.

The construction of these two new units is a key part of Acron Group’s development strategy adopted in 2017, which is designed to make maximum use of existing production potential. Their launch increased the group’s nitric acid output by 270 000 t, to 1.8 million tpy.

Novgorod GIAP (a member of Acron Group) was the general designer for both units: “Following the commissioning of the first nitric acid unit, we reached record-high output of ammonium nitrate and UAN. The launch of the second unit will help us further boost the group’s output of key products and considerably expand our product portfolio”, said Chairman of Acron’s Board of Directors, Alexander Popov.

Acron Group will continue increasing its nitric acid output in Veliky Novgorod. A third 135 000 tpy unit is scheduled to launch in late 2019. The group will raise an additional US$11 million for the project, bringing total investments in the three nitric acid units to US$50 million.

Nitric acid is a primary material for mineral fertilizers, and the Veliky Novgorod site first began producing it in the 1970s. With the launch of its new nitric acid units, Acron will reduce its ammonia consumption to the lowest rate among similar facilities in the CIS. The highly efficient gas turbine unit GTU-8 will save over 4.3 million m3 of natural gas annually. As an added benefit, the expensive catalyst grids will need replacing only once a year, instead of the semi-annual replacements previously required.

Read the article online at: https://www.worldfertilizer.com/nitrogen/28062019/acron-increases-nitric-acid-output-in-veliky-novgorod/

You might also like

Quest Integrity

WEBINAR - Balancing Production and Reliability in Steam Reformers

In this webinar Quest Integrity will present an engineering methodology for understanding risk, particularly in catalyst tubes, and making decisions regarding operation. Register for free today »

 
 
 

Embed article link: (copy the HTML code below):